Custom

Home

Description

Uses

Due to site restrictions or the need to lift materials at a large inclination, in order to prevent the scattering of transported materials. The rib conveyor belt must be able to withstand the very high stresses and repeated bends that occur at high volumes of steep angle conveying. Use higher quality, very low elongation polyester fabric to provide higher stiffness values. The product is suitable for conveying materials under the condition of large inclination angle (0 °-90 °).

Features

When conveying materials, large inclination angle to 90 ° can be realized

Large conveying capacity, the material will not be scattered.

Can be transferred from horizontal to inclined, from inclined to horizontal angle transition

The conveyor has simple structure, flexible layout and small footprint.

Standard specification

Type	Tensile strength N/mm	Kind	Number of Skeleton Layers	Coating thickness of steamed glue (mm)	Weight (kg/m²)	Minimum rolling diameter mm
XE	200	Ordinary	2	2x2	9.8	200
XOE	315	Ordinary Heat resistance Flame retardant	2 1	4x2	11.3	315
	500		3 1	4x2	13.2	400
	630		4 1	4x2	14.9	500
	800		5 1	4x2	17.8	630
	1000		6 1	5x3	22.0	800
XUE	315	Ordinary	2 1	4x3	12.7	315
	500		3 1	4x3	14.5	400
	630		4 1	4x3	16.3	500
XDE	315	Ordinary	2 2	4x3	13.7	315
	500		3 2	4x3	15.5	400
	630		4 2	4x3	17.3	500

Wave skirt

The skirt is made of high quality rubber.

There are also two types: pure rubber (BG) rubber with fabric reinforcement (BGT)

Conveying occasion	Height	Skirt width	Bottom Width	Weight	Minimum roll diameter
Conveying occasion	mm	mm	mm	mm	mm
N	80	44	50	1.6	200
N	100	44	50	1.8	250
S	120	66	75	3.1	320
	160	66	75	4.1	400
	200	66	75	5.1	500
	240	66	75	6.1	550
ES	300	88	100	12.0	700
ES	400	88	100	16.0	900

Note: N-light load; S-medium load; ES-heavy load.

Diaphragm

The diaphragm is made of high quality rubber, with high elastic support.

There can also be two types: pure rubber rubber, with a fabric reinforcement layer in the rubber

T	Type	T75	T110
	Height (mm)	75	110
	Weight (Kg/m)	1.65	2.20
	Minimum roll diameter (mm)	200	300
TC	Type	TC110	TC140	TC180	TC220	TC260
	Height (mm)	110	140	180	220	260
	Weight (Kg/m)	2.6	5.5	7.0	8.0	10.2
	Minimum roll diameter (mm)	350	370	450	500	600
TCS	Type					TCS280	TCS360
	Height (mm)					280	360
	Weight (Kg/m)					18.5	22.0
	Minimum roll diameter (mm)					700	700

Standard Name	Type	Standard number and update time	Tensile strength MPa ≥	Elongation at break% ≥	Abrasion mm³ ≤	Hardness Shore A	Aging test
	Standard number and type	Formula number used by Huaxia				Hardness Shore A	Aging condition/change rate of tensile strength%
						Aging test
						Tensile strength change	Change rate of elongation at break%	Ozone aging test
Japanese Standard-Steel Cord Conveyor Belt	JISK 6369-S		18.0	450	200	70℃x168h±25	70℃x168h±25	No ghost crack
	JISK 6369-A		14.0	400	150			No ghost crack
	JIS K 6369-L	P15、XP	15.0	350	200			No regulation
	JISK 6369-D	M18、XP	18.0	400	100
	JIS K 6369-H	P25/P25 head glue, XP	24.0	450	120
Japanese Standard-Fabric Core Conveyor Belt	JIS K 6322-P	P12、T1-3	8.0	300	400	70℃x168h±40	70℃x168h±40	No regulation
	JISK 6322-G	P14、T1-3	14.0	400	250	70'℃x168h±30	70℃Cx168h±30	No regulation
	JIS K 6322-S		18.0	450	200	70℃x168h±25	70℃x168h±25	No ghost crack
	JIS K 6322-A		14.0	400	150	70℃x168h±25	70℃x168h±25	No ghost crack
South African Standard-General Purpose Fabric Core Conveyor Belt	SANS 1173-A	M20、T1-3	18.0	400	70	70℃x168h±20	70℃x168h±20
	SANS 1173-C	M20、T1-3	20.0	400	150
	SANS 1173-M	P25/P25 head adhesive, T1-3	25.0	450	120
	SANS 1173-N	PM17、T1-3	17.0	400	150
South African Standard-Steel Cord Conveyor Belt	SANS 1366-F	P14、XP	14.0	400	180	70℃x168h±20	70℃x168h±20
	SANS 1366-A	M20、XP	18.0	400	70
	SANS 1366-C	M20、XP	20.0	400	150
	SANS 1366-N	PM17、XP	17.0	400	150
	SANS 1366-M	P25/P25 head glue, XP	25.0	450	120
American Rubber Manufacturers Association Standard	RMA-I	PM17、T1-3	17.0	400	120
American Rubber Manufacturers Association Standard	RMA -II	P14、T1-3	14.0	350	150

Covering adhesive performance

According to ISO14890-2013 standard requirements:

Type	Tensile strength (ISO37) Mpa	Elongation at break (ISO37) %	Abrasion (ISO4649) mm³
H	24	450	120
D	18	400	100
L	15	350	200

German Standard DIN-22102
Grade	Tensile strength ≥ Ma	Elongation at break ≥ M%	Abrasion ≥ mm³	Adhesion strength between layers of cloth (N/mm)	Adhesion strength between cover layer and cloth layer (/mm)
					Covering layer thickness 0.8~1.5mm	Cover layer thickness> 1.5mm
W	18	400	90	≥ 5	3.5	4.5
X	25	450	120
Y	20	400	150
Z	15	350	250

English Standard BS 490
Grade	Tensile strength ≥ Ma	Elongation at break ≥ M%	Abrasion ≥ mm³	Adhesion strength between layers of cloth (N/mm)	Adhesion strength between cover layer and cloth layer (/mm)
					Covering layer thickness 0.8~1.5mm	Cover layer thickness> 1.5mm
M	24	450	-	≥5.25	3.15	4.5
N	17	400	-

Australian Standard AS 1332-2000
Grade	Tensile strength ≥ Ma	Elongation at break ≥ M%	Abrasion ≥ mm³	Adhesion strength between layers of cloth (N/mm)	Adhesion strength between cover layer and cloth layer (/mm)
Grade	Tensile strength ≥ Ma	Elongation at break ≥ M%	Abrasion ≥ mm³	Adhesion strength between layers of cloth (N/mm)	Covering layer thickness 0.8~1.5mm	Cover layer thickness> 1.5mm
A	17	400	70	6	4	4.8
E	14	300	-
F	14	300	-
M	24	450	125
N	17	400	200
S	14	300	250
S*	12	300	250

South Africa SANS 1173:2005
Grade	Tensile strength ≥ Ma	Elongation at break ≥ M%	Abrasion ≥ mm³	Adhesion strength between layers of cloth (N/mm)
					Adhesive strength between cover layer and cloth layer (N/mm)
A	18	400	90	≥ 7	≥ 5
X	25	450	120
M	24	450	150
N	20	400	250

Specification and Technical Parameters of Nylon Multilayer Fabric Core Conveyor Belt

Fabric Type	Fabric construction		Fabric type	Thickness of adhesive tape (mm/p)	Strength series (N/mm)					Cover glue thickness		Width range (mm)
Fabric Type	By	Weft	Fabric type	Thickness of adhesive tape (mm/p)	Layer 2	Layer 3	4 floors	5 floors	6 layers	Upper covering layer	Lower cover	Width range (mm)
Nylon	cotton nylon	cotton nylon	Nn-100	1.00	200	300	400	500	600	0-12	0-10	400-4000
			Nn-125	1.05	250	375	500	625	750
			Nn-150	1.10	300	450	600	750	900
			Nn-200	1.20	400	600	800	1000	1200
			Nn-250	1.40	500	750	1000	1250	1500
			Nn-300	1.50	600	900	1200	1500	1800
			NN-500	1.60	1000	1500	2000	2500	3000

Adhesive strength, elongation performance in accordance with the following table

Adhesion strength, elongation performance
Core material	bond strength			Extension performance
	Interlayer N/mm	Covering layer and layer N/mm		Full thickness longitudinal elongation at break	Full thickness longitudinal reference force elongation
		Covering layer thickness ≤ 1.5mm	Covering layer thickness ≥ 1.5mm
Polyester Canvas	≥ 5	≥ 4.5	≥ 5	≥ 10%	≤ 4% 6

The covering performance of the tape is in accordance with the following table

Covering performance of tape
Overlay Level	Tensile strength		Elongation at break	Abrasion	Change rate of tensile strength and elongation at break after aging
Overlay Level	Mpa	Kgf/cm²	%	mm³	%
H	≥ 24	≥ 240	≥ 450	≤ 120	-25~ 25
D	≥ 18	180	≥ 400	≤100	-25~ 25
L	≥ 15	150	≥ 350	≤200	-25~ 25

Advantage

In the production management, high, fine, strict word check. In the selection of raw materials, the first choice of national excellent enterprises and products, all raw materials into the factory must be inspected, qualified before they can be put into production. The inspection policy implemented by our company is self-inspection, mutual inspection, special inspection, layer upon layer to control the quality inspection, so that the product quality is always in a controlled state in the manufacturing process.

Factory Direct Sales

Selected Raw Material

Processing Customization

Durable

Intimate After-Sales

Timely Delivery

Company Profile

Baoding Lixin Tape Manufacturing Co., LTD., located in Li County Rubber Industrial Park, Baoding City, Hebei Province, is a modern enterprise focusing on the development, production and sales of conveyor belts. The company was founded in 1995, after years of development, now has the domestic advanced level of production line, become a leader in the conveyor belt industry.
The company attaches great importance to the construction of quality management system, and the management mode has passed the ISO 9001 international quality system certification and 2000 standard certification. Through the strict quality control process, from raw material procurement to product delivery, every link is strictly tested to ensure that product quality meets international standards.

National stable quality qualified products

National Industry Quality Service Integrity Demonstration Enterprise

Science and technology enterprises in hebei province

Contract-abiding and trustworthy enterprises

Customized Delivery Process

The company attaches great importance to the construction of quality management system, and the management mode has passed the ISO 9001 international quality system certification and 2000 standard certification. Through the strict quality control process, from raw material procurement to product delivery, every link is strictly tested to ensure that product quality meets international standards.

Goods will be strictly tested before delivery, please check carefully after receiving the goods, if there is any problem, please contact us in time.

Online Communication

Provide Custom Drawings

Merchant Quotation

Sign A Contract

Processing And Production

Packaging And Distribution

Confirm Receipt Of Goods

Successful Transaction

Wavy large inclination conveyor belt skirt conveyor belt

Large inclination bucket elevator belt